Homogeneous Membrane Filter
Product Introduction
It is used for the front-end pretreatment of membrane-based water treatment equipment. It is a pressure-driven filtration, which can effectively retain impurities such as suspended solids, colloids, macromolecular organics, etc. At the same time, it can also be used as the secondary filtration of the mechanical filter to fully guarantee the water quality of the filter effluent. According to the water quality of the incoming water, the filter can choose between cross-flow filtration and dead-end filtration. The recovery rate of produced water can generally reach 80%~95%, and the water inlet pressure generally does not exceed 2.0 bar.
The homogeneous membrane filter is easy to install, easy to operate, resistant to strong acid and alkali, can operate alternately forward and reverse, easy to clean, and resistant to chemical cleaning.
Technical Parameter
Remark: The above data are reference values, not the performance guarantee values of the equipment, and the data in the table may change.
Application Field
It is used for the front-end pretreatment of membrane-based water treatment equipment. It is a pressure-driven filtration, which can effectively retain impurities such as suspended solids, colloids, and macromolecular organics.
The Project Site
Next
Next
Contact Us
Address: 155 Incubation Two Lane, Photoelectric Industrial Park, Weifang High-tech Zone, Shandong
Production base: 00699 North Wisdom Third Street, Weifang Binhai Economic and Technological Development Zone
Tel: +86-536-8895639 +86-16605366009
Fax: +86-536-8861088
Mailbox: wx@sdtianwei.com
© Shandong Tianwei Membrane Technology Co., Ltd. All rights reserved.
